- [ Preparing for a Lumenlab micRo V2(V3) CNC Router ]
If you wish the read the process of waiting and to see some of my research before the micRo CNC arrived then check out this page.
- [ Installing Ubuntu 8.04 and EMC2 for the Lumenlab micRo CNC router ]
What to do before your micRo CNC arrives or as you unpack it from the box. This is the first of many, many blog articles that explains the experiences of my new CNC workshop. This article explains the installation process of Ubuntu 8.04 LTS and EMC2.
- [ Installing Eagle and PCB-GCODE in Ubuntu ]
This is something else that can be done before your router arrives.
- [ A Quick Image to Gcode Tutorial Using EMC2 ]
I video the micRo doing an Image to GCODE. I also give a quick rundown on what to do when you open an image in EMC2.
- [Setting up the micRo V3 CNC Router for the first time]
This will explain how to set up the micRo v3 for the first time. This will cover the computer, Syncro AMP, and robot connections. Check back later for spindle installation.
- [Configuring the files in Ubuntu 8.04 for the micRo V3 CNC Router]
This article will cover the file settings, which were obtained direct from Lumenlab.com. I just show my implementation of these files.
- [ Converting an Eagle Board to GCODE ]
This is the outline on taking an Eagle board and making CNC files with PCB-GCODE. The next step is making sure that the GCODE is good stuff.
- This will outline taking CNC files and putting them into EMC2.
- [ micRo V3: Drilled Base and Planing MDF for Circuit Boards ]
Drilling and tapping the base. A few pictures and two videos.
- [ Results from etching a circuit board – Eagle, PCB-GCODE, micRo CNC router ]
This is another installment of me using Eagle cad, PCB-GCODE, and EMC2 to make the micRo work. Does not explain the process. This is just pictures and video.
- This is, without a doubt, incomplete
- [ My First Video Run with the micRo CNC Router from Lumenlab.com ]
This is the first run that I took video of. It is an Eagle board and some hand coded GCODE.
- [ A Quick micRo Blip…More Testing. ]
This is just a post of a circuit drawn on a piece of glass. There is also a video of the action attached to this post.
- [ Two micRo CNC Router Videos: Drawing a ruler and EMC Image to GCODE ]
Two videos and two pictures of some micRo drawings. A demonstration of Image to Gcode.