6DG6GT Tube Amp Design

Rewriting History Is Fun!

In 2009 I decided that I wanted to build a tube amp. Here it is 2013, and I have now decided that THIS AMP needs to be done right.

My original build worked, but it was thrown together without a lot of thought. The circuit board was an okay design, but certainly needed many improvements. The layout of the “iron” of this amp was crappy at best. Not a single transformer was mounted on the chassis! Just imagine the amount of wiring that came out of the back. The big-bottle rectifier tube was pressed against a 2×4 board that held the cabinet together! I used a drill bit to cut a notch out of the 2×4 to keep it from catching on fire. Really, what was I thinking? I’m better than that!

This new design is not exactly the same amplifier. I’m trying out some different ideas such as a master volume, parts placements, parts values, and layout. The chassis layout is based closely on AX84.com‘s P1 layout. I am using a 16″x8″x2″ aluminum chassis from Tubesandmore.com. Some of my parts come from there and others came from Hoffmanamps.com. Some I’ve purchased recently, and others I purchased back in 2009!

I am using a design based on this Instructable (Guitar Tube Amp by GMoon) and on the AX84′s P1. I took a little from each design and changed a few things to make it my own. I have also been using info from The Valve Wizard.

Stay tuned as I work on this amp. I have parts of the turret board completed, and I have the preliminary chassis laid out. I’ve been using the guides in Inkscape to draw the designs out. This takes considerable time to complete, but I believe that it will produce excellent and repeatable results. All of this information will be available for download when I complete the build. While I’m taking great pains to ensure that the build is flawless, things do arise that make changes inevitable. I am just hoping that it won’t happen this time and that everything will be perfect.

About robbie

I am an electronics enthusiest and a ham radio operator (W1RCP). I like to play with electronics. It's fun and educational. I looked forward to working in the engineering field in the future. I have a BS in Electronics Engineering Technology from DeVry University. I also have an Associate's degree in Marketing Management from Moultrie Tech, and a diploma in Electronics from MTC.